Previously only available in 400 and 1000ft cinema reels, we now offers Fujifilm motion picture negative Eterna 500T film (8573) in convenient hand-rolled 35mm canisters of 36 exposures x 1 rolls!
=========== Official Introduction of Fujifilm Eterna 8573 500T =================
Vitalize Imagination! Exceptional Grain & Outstanding Gray Balance
Setting a new standard for motion picture film, this high-speed (E.I.500) color negative film achieves ultra-fine grain, natural skin tones and outstanding gray balance. Dramatically improved grain produces natural results for even the most sophisticated studio work including digital processing and computer graphics.
This film’s subtle expressive power and ability to capture detail brings imagination to life.
============== Motion picture films ==========
The films made for motion pictures must be capable of being enlarged and projected on the big screen on the cinema, therefore there are strict requirement for the quality and tolerance of the films made for movie industry. Negative films for motion picture have super tolerances of about /- 15EV, therefore even 500D/500T (with very high light sensitivity) films have very fine pigments.
The color tone for motion picture negative films is different compare to color negative films. If you haven’t tried motion picture negative films, why not try and see ?! You will certainly find yourself addicted to filming motion picture negative films!
=========== What is hand-roll bulked film? ===========
All the films sold by us are the films made for making motion pictures and are hand-rolled in to canisters. They are suitable for used in a 135mm camera and comes in 36 exposures in one canister. We’ve tested our hand-rolled films in local market and respond is great. So we can garantee our hand-rolled films is scratch-free and fresh to shoot.
The Bulk film loader counter runs from S to S. Usually if using most film camera could shoot 35-36 exp. If use Auto Film Loading/Advancing camera could shoot down to 33-34 exp due to camera design.
We use 200 or 400 ISO canister on 250D, use 400 ISO canister on 500T and 400T, use 100 ISO canister on 100D. If you purchase 250D on auto-DX camera please check the film canister when you received. Auto-DX camera may need to do EV /-. We will label every film with correct film name as product picture presented.
=========== Our Film Stock Quality ===========
The number of film used for motion picture industry reduces hugely through out the years as majority of film making resources have been cut. All of film sold by us are kept in a huge film freezer under -10 degrees C so customers can purchase and use with a ease of mind.
============== Film Shipping Notice ==========
| ATTENTION : We will label “CAUTION: FILM, PLEASE DO NOT X-RAY” on the package while shipping, and in our experience, ASA/ISO lower 400 are not affected by the security X-RAY. However, please purchase at own consideration. |
============== Motion picture Negative films Development Knowledge ==========
Motion picture Negative films contain rem-jet layer. The layer is used for protecting from high speed film rolling. You have to REMOVE IT BEFORE C41 process. The film is suitable for you If you can process and dev color negative film (C41 process) by yourself. Send motion picture negative film to Express film process machine is not recommended. Because C41 solution will resolve the layer and would containminate development solution.
There are many ways to remove rem-jet layer. Some user says just hot water could remove 90% of it. The rest could remove along with C41 process. If you use in C41 process directly is OK, but the solution can use only in one process. We provide official rem-jet remove solution formula down below.
| Formula of Remove rem-jet backing layer ( Prebath) | |
|---|---|
| borax (decahydrate) | 20g |
| sodium sulfite | 100g |
| Sodium Hydroxide | 1-1.5g |
| plus water to 1 L | |
| 25-40℃ | |
| 15sec to Softens rem-jet backing | |
| Remove rem-jet backing: use the formula, shake 15-30sec, than add clean water and shaking to clean out rem-jet layer (3 times). process would remove 98% backing layer. temprature 25-40 ℃ You can adjust to fit after Dev process. | |
| The storage life of solution could last 2 weeks. If kept under a close -fitting floating cover can last 4 weeks. After remove rem-jet you can dev with C41 or ECN-2 process | |
The number of film used for motion picture industry reduces hugely through out the years as majority of film making resources have been cut. All of film sold by us are kept in a huge film freezer under -10 degrees C so customers can purchase and use with a ease of mind.
Package Include
35mm / 36 exp / Fujifilm Eterna 500T (8573)
This auction contains 1 Rolls.
Reviews
There are no reviews yet.